Did a little water and dirt get into the sprinkler? Here’s how to clean it so your system runs more smoothly.
Step 1: Check that there is no standing water in the head of your sprinkler by removing all screws on top of it, rinsing them with hot tap water, then running cold water through each one until they’re ice-cold. Step 2: Install new heads onto either side of the pipe and tighten screws down securely.

The “how to clean fire sprinkler heads” is a step by step guide on how to clean your sprinkler heads.

It’s possible that some of the links in this article are affiliate links. If you make a purchase after clicking on an affiliate link, I may get a commission. In addition, I receive money on qualifying purchases as an Amazon Associate. —

Whether you’re a lawn care enthusiast like me, you’ve probably questioned if your yard is suffering from inefficient blocked sprinklers. There’s no need to worry, however, since cleaning sprinkler heads at home is simple, fast, and efficient.

You’ll need an adjustable vice grip, needle-nose pliers, and a cloth to clean your sprinkler heads at home. If you need to clean your sprinkler heads thoroughly, you’ll also need a bucket, a can of ordinary home dust remover or liquid detergent, and a firm bristles brush.

Due to the quantity of soil, grass, and debris in a typical garden, clogged sprinkler heads are rather frequent. As a result, maintaining an uniform distribution of water and having the best-looking grass in the neighborhood necessitates cleaning your sprinkler heads at home.

Sprinkler Heads: How to Clean Them at Home (Pop Up Sprays)

Before you begin your quest for the ideal lawn, make sure you have all of the necessary equipment on hand, including an adjustable vice grip, needle-nose pliers, and a towel. If you check your sprinkler heads before beginning the cleaning procedure, you should be able to discern whether or not they need to be cleaned thoroughly.

Even though your sprinkler heads don’t seem to be excessively dusty, you may need to utilize the thorough cleaning approach if you have never cleaned them before or if it has been more than a year since you last cleaned them.

Lift the Sprinkler Tip in the First Step

Gently lift the top of the sprinkler head out of the sleeve using your fingers to grip the tip of the sprinkler head. It should be able to be readily lifted and yanked out. If you’re having trouble getting the head to pop out, you may need to turn on your sprinkler system.

Step 2: Securing the Sprinkler

While cleaning the interior filter, you may need to hold the shaft of the sprinkler tip with your adjustable vice grips to keep it from sliding or dropping back down. To keep the sprinkler in position, you’ll need to adjust the grip as required.

Remove the Sprinkler Filter from the Shaft in Step 3.

To clean the filter within the sprinkler, just grip the top of the sprinkler head and unscrew by the threaded area of the sprinkler head. If you’re having trouble removing the inner sprinkler filter on your own, you may need to use a set of needle-nose pliers.

If you’re cleaning many sprinkler heads at once, ensure sure the sprinkler filter you removed is placed next to the sleeve it came from. Remove and clean all of the sprinkler filters at the same time to avoid mixing them up when it’s time to replace them.

Step 4: Using a towel, clean the sprinkler filter

Now that the internal filter has been removed, get an old towel and use it to wipe any dirt, grass, or debris that may have clogged the filter.

To avoid mixing up the filters, clean them one at a time and set them back on the ground next to the sprinkler head where they came from.

Step 5: To clean the sprinkler system, flush it.

Keep the sprinkler in place with your adjustable vice grip. Turn on your sprinkler system and let the water flow for a couple of seconds. Any dirt, grass, or debris obstructing the pipe will be washed away by the water flow.

Reassemble your sprinkler head in step six.

Your sprinkler head should now be clean, and your irrigation system should no longer be blocked. Drop the internal filter back into place and remove the adjustable vice grip to reassemble your sprinkler head.

Link to Youtube

Sprinkler Heads: How to Clean Them at Home (Deep Cleaning Method)

Remove the Sprinkler Head from the Sleeve in Step 1.

Pull the sprinkler out of the sleeve using your fingers. The sprinkler head should now be in the position it would be in if the system was turned on. By unscrewing the complete sprinkler head from here, you may remove it.

Step 2: Wipe the Sprinkler Head to Remove Debris

Wipe the sprinkler head with a dry cloth to remove any dust, sand, grass, or other material that may be obstructing it. Examine the sprinkler head for any tiny stones, grass, or insects that might be obstructing the flow.

Step 3: Place the Sprinkler Head in a Bucket that has been removed.

Fill a bucket or a plastic bag halfway with lukewarm or boiling water. Remove the sprinkler head and place it in the plastic package or bucket. The bucket’s water level should be high enough to fully cover the sprinkler head.

While the sprinkler head is immersed in your bucket, apply a simple home rust remover to it. This will aid in the breakdown of any calcium or other mineral build-up. Allow the sprinkler head to soak in the bucket for about 30 minutes.

Scrub the Sprinkler Head with a Hard Brush in Step 4

Scrub the sprinkler head with a firm brush, ideally one with bristles, to remove any leftover dirt or build-up. An old toothbrush will suffice. Rinse the sprinkler head in cold water once you’ve cleansed it.

Step 5: Reinstall the sprinkler head in the sleeve.

Replace the sprinkler head in the sleeve it came in. It should return to its original position and not protrude from the ground. After you’ve reinstalled everything, you may want to test your sprinkler system to make sure it’s working properly and that there are no leaks.

How Often Should Sprinkler Heads Be Cleaned?

When attempting to maintain a well-functioning sprinkler system, clean your sprinkler heads on a regular basis, or at least once a year. Some individuals like to clean their sprinkler heads more often, cleaning them twice a year.

Checking your sprinkler system when it is not in use during the winter months is also a beneficial lawn care technique, since the absence of water flow makes it easy for the sprinkler heads to get clogged.

Checking your sprinkler heads on a regular basis and cutting the grass around the sprinkler head to prevent tall grass from clogging the sprinkler head will help you avoid having to clean them as frequently.

Last Thoughts

Cleaning your sprinkler heads at home is essential to ensure even water distribution over your yard and the best-looking grass in town! An adjustable vice grip, a set of needle-nose pliers, an old towel, household rust remover, and a bucket are all you’ll need to clean your sprinkler heads at home.

At the very least, clean your sprinkler heads once a year. You should, however, inspect them on a regular basis for any accumulation of garden detritus. Sprinkler system inspections are particularly necessary during the winter months when the sprinklers are not in use, since the absence of running water makes it easier for the heads and pipes to get blocked.

The “how to clean clogged sprinkler head” is a guide that will help you with your sprinkler heads. It will explain how to clear out the dirt and debris, so that the water can flow freely.

Related Tags

  • how to clean rotating sprinkler heads
  • how to clean dirty sprinkler heads
  • how to clean sprinkler nozzle
  • nfpa code for cleaning sprinkler heads
  • how to clean hunter sprinkler heads