The woody area of your garden is getting a little too dense. You want to find the best way to get rid of that tree stump and make it look neat again!

The “how to stop a willow tree stump from growing” is an issue that many homeowners have. There are 4 effective ways to stop this problem.

It’s possible that some of the links in this article are affiliate links. If you make a purchase after clicking on an affiliate link, I may get a commission. In addition, I receive money on qualifying purchases as an Amazon Associate. —

It takes a lot of effort to keep a yard tidy and clean. Keeping the grass cut, the flower bed maintained to, and a million other things may help you achieve the aesthetic you want for your outside area. Taking care of the trees is a difficult chore in and of itself.

Pruning or chopping away branches from a tree is challenging enough. If the tree is rotten or spilling leaves all over the place, chopping it down becomes necessary. This may be difficult and risky, and it normally requires the aid of a specialist.

The concern is that after the tree is down, the issue may not be remedied. There are tree species that will produce sprouts from their roots and stumps for a period of time after the tree has been cut down.

These seedlings might appear roughly 30 days after the tree has been chopped down in certain cases.

This is due to the fact that the tree is dead, yet the stump and roots may go on without it. The sprouting is supposed to take the place of the deceased tree as if it were a natural occurrence.

Given that the plan was to chop down the tree in the first place, this may be discouraging. Not only that, but it has the potential to be dangerous. Roots may expand underground unintentionally, causing damage to walkways, pipelines, and other elements of a property.

Fortunately, actions may be taken to not only remove the tree, but also to prevent root and trunk regrowth.

Stump-Killing Herbicide No. 1


Using a stump-killing herbicide like this concentrated herbicide by Monterey is one of the most efficient methods to get rid of that troublesome stump following a tree removal (available on amazon). In most cases, you’ll want to do this shortly before you cut down the tree or within 30 minutes after chopping it down.

Also, when it comes to destroying a freshly cut stump in your yard, spring is the most effective time of year.

Brush-on and spray-on herbicides are the two kinds of herbicides available. Both of these products were designed particularly to destroy stumps and prevent further development. If you’ve already chopped the stump, be sure to spray your herbicide to the whole cut area.

First, read the directions since they may say something different. Follow the manufacturer’s instructions for that specific herbicide.

If used correctly, these kinds of stump-killing herbicides will not permeate the soil or have an effect on nearby plants. The herbicide’s chemicals will go down the stump and into the roots. This poisons the roots, killing them and prevents them from growing any further.

If sprouts continue to appear after the stump has been removed, just spray the herbicide to those sprouts. This is typical because roots might be too far away from the trunk for the stump chemical to reach it (or when stump killer was not applied).

You may use a broadleaf weed herbicide if you want to take a more aggressive approach with herbicides. If you can’t locate it, use a nonselective herbicide instead. Herbicides of this sort are designed to destroy any plant that comes into touch with them.


If you use this strategy, make sure you’re prepared in case another plant in the region dies. If you aren’t familiar with the impacts of a nonselective herbicide, this may be a terrible surprise.

When using herbicides, it’s critical to follow the manufacturer’s instructions. These are toxic compounds, and handling them incorrectly may be hazardous not just to other plants in the vicinity, but also to you.

Not only that, but certain herbicides may actually harm the soil by being active long after the first application. Take the necessary steps to safeguard any plants you desire to preserve.

If you want to plant in that location again in the near future, use a product that will decompose quickly so that the soil is not harmed.

You may just spray the herbicide where you need it after sprouts develop. However, if there are plants close where the stump was, you may wish to dig out the sprouts by hand. It is preferable to be safe than than sorry.

To dig up the sprout, start by excavating all the way around it, being careful to go a few inches below the surface level. You should clip the sprouts just below the ground level.

You’ll need pruning shears or scissors for this. When you’re done, cover the earth to keep any sunlight out.

Killing the sprouts as soon as they emerge depletes the root’s food stores. It may take some time, but the roots will ultimately run out of stores, and the noxious sprouts will cease sprouting where the stump formerly stood.

2 – Extensive Chemical Use


Herbicides may nevertheless cause sprouts to appear from time to time, which can be a frustrating experience. So, if you want a more successful stump removal method, consider injecting stump-killing chemicals into the stump directly.

This procedure may need many applications, but it is one of the simplest methods to prevent the tree from growing through those shoots again. The most challenging element of the tree removal procedure might be the sprouts.

To begin, drill holes all the way across the trunk’s surface. The better the outcomes will be if you can dig deeper into the stump. After you’ve drilled your holes, you’ll need to obtain a commercially available stump killer and fill them in.

Take cautious while using these herbicides, as with stump-killing herbicides. Before doing anything, read the manufacturer’s warnings and guidelines since it may be harmful to other plants in the vicinity.

Take those weed killers for broadleaf weeds. Glyphosate is used to make them. This is a good approach to get rid of obstinate stumps in your yard, but it has the potential to spread to other plants and trees where your old tree’s roots may have been.

This may be harmful or fatal to those plants, necessitating the replacement of any plants that come into contact with the flames.

Another key factor to consider is your own personal security. These are very dangerous substances. Make sure you’re taking the necessary precautions to keep yourself safe throughout this procedure. Wear goggles, gloves, and a long-sleeved shirt to protect your eyes.

Make sure it’s out of reach of any youngsters who may be there. Always treat these compounds with care since they may be hazardous if handled incorrectly.

Stump Grinder No. 3


This is usually a last-ditch attempt since renting a stump killer might be more costly than purchasing a few chemical herbicides. Even so, a stump killer may be a highly efficient way to get rid of those stubborn stumps in your yard.

Keep in mind that a stump grinder is not only more costly, but it will also need more effort to complete the task. If you choose this technique, set aside your weekend to guarantee that you do the work thoroughly.

Stump grinders are, for the most part, gas-powered machines. Not only that, but they’ll cost you anything from $100 to $200 every day you need it.

If you’ve tried all of the other options and they don’t appear to be working, keep this fee in mind. Arriving at the rental location and hearing that number without knowing what to anticipate might be a bit of a shock.

You’ll want to go above and above with safety precautions, just like you did with pesticides. Herbicides, on the other hand, are harmful in their own right. If not handled with the greatest care and attention, a stump grinder may be highly deadly.

Make sure the dealer shows you all of the controls as well as the safest method to use the machine before you take it off the rental property. This may take some additional time, but it will be well worth it if you want to avoid the hazards that a stump grinder poses.

Keeping with the safety theme, make sure you’re wearing suitable eye and ear protection. There will be a requirement for goggles and ear protection. When it comes to detritus, stump grinders are unpredictable. Goggles will shield you from any stray bits of stump that may be thrown your way.

Stump grinders make a lot of noise. You run the danger of inflicting unnecessary harm to your hearing if you don’t use suitable ear protection when using the machine. When utilizing a stump grinder, take additional precautions to ensure your safety.

Before you start grinding your tree stump, make sure you remove any pebbles that may be around the base of the stump. Rocks are another potentially harmful projectile that may be thrown from the stump remover, and they can also cause damage to the machine.

The last thing you want to do is break the stump grinder. On top of your rental price, replacing a damaged or broken stump grinder may be extremely costly.


If you have a chainsaw, you can make the whole procedure a lot simpler. Cut the stump down even further with your chainsaw. The closer you can get to the ground, the simpler it will be to feed the stump grinder with the rest.

This may make the whole grinding procedure a lot simpler than if you attempted to grind the whole stump by yourself.

Finally, begin the stump grinding procedure. You use a hydraulic lever to elevate the grinder over the stump and then carefully drop it onto the stump.

After that, the grinder will travel from side to side, clearing the wood as it goes. It will eventually work its way into the earth, destroying the roots in the process.

When you’re done using the stump grinder, turn it off and fill the hole with dirt to level it out.

4 – The Stump Is Being Burned


If you adopt this procedure, use extreme caution. Fire is, without a doubt, deadly and should not be approached lightly.

Not only that, but you’ll need to verify any local regulations to determine whether burning stumps is even legal in your location. There are no penalties for attempting to remove that stump.

If burning the stump is OK, begin by drilling a few holes in it. Make sure they’re about 8 to 10 inches deep, and that any debris in the hole has been removed.

It’s now time to fill the holes with potassium nitrate. Fill the holes with hot water after this is finished. The potassium nitrate is dissolved by the water and distributed throughout the stump.

After you’ve finished this phase of the procedure, ignite the scrap wood you pulled out of the holes earlier on fire and place it in the holes. They’ll start to smolder, and eventually the whole stump will be reduced to ash.

This may take some time, but don’t forget to keep an eye on the stump. Because fires are unpredictable, leaving the stump unattended might result in the fire spreading without your notice.

You may remove the stump after it has entirely turned to ash. The most efficient way to remove that many ashes is with a shovel.

There are a variety of options for getting rid of those bothersome stumps. It all depends on how much effort you’re willing to put in and how successful the strategy you’re planning to use is.

The “how to stop a tree from growing without killing it” is an article that discusses 4 effective ways to stop a tree stump from sprouting. The article also provides information on what type of trees are most likely to have this problem and how long the process will take.

Related Tags

  • will painting a tree stump stop it from growing
  • homemade tree stump killer
  • tree paint to stop growth
  • killing tree stumps with bleach
  • how to stop small trees from growing back