When fishing, the bail is a lever that controls the line release on your reel to let you make it easier to cast out and re-bait. When this piece of metal doesn’t work well or isn’t closing properly, there are several different things that could be causing these issues. Let’s explore why they may occur and how you can fix them yourself instead of replacing your reel just yet..

The “bail arm assembly” is a part of the fishing reel that allows the bail to close. There are 3 common reasons why this may not be working, and how to fix it.

There are affiliate links in this post. If you make a purchase after clicking on an affiliate link, I may get a commission. I also earn money from qualifying purchases as an Amazon Associate. —

You had been looking forward to going fishing for the last week. It’s incredibly peaceful, and spending time doing what you like will make you very happy.

However, there are occasions when fishing becomes more difficult than it needs to be. It’ll be irritating if your fishing reel bail isn’t operating correctly while you’re simply trying to have fun.

Bails on fishing reels that do not close properly are a common problem. When this occurs, it’s not always evident what’s wrong.

Continue reading to find out what to do if the bail on your fishing reel won’t close. This should assist you in determining what’s going on so that you can take action and return to fishing.

It’s supposed to close on its own.

Your spinning bail reel is designed to shut automatically as soon as you start rotating the handle. You won’t be able to accomplish what you need to do if things aren’t operating correctly.

This is aggravating, but all you have to do now is find out why it’s occurring so you can repair it. This usually happens when one of three things goes wrong.

1 – The Bail Spring Is Defective

Have you looked at the bail spring in detail yet? It’s likely that anything is amiss with the bail spring, which is preventing the reel bail from shutting.

People who experience this issue often realize that the spring has fractured and is no longer functioning properly. To get things running again, you’ll need to go out and get a new bail spring.

If this is the case, you may not be able to do anything until you get to the shop. This is inconvenient, but it happens from time to time.

If you get high-quality reel components, this is less likely to happen. Hopefully, this won’t happen frequently enough for you to be able to relax and enjoy your fishing.

2 – The Bail Spring Is Incorrectly Installed

Another possibility is that the bail spring was fitted improperly. Maybe the spring isn’t broken, but it’s positioned wrong or something.

It’s difficult to identify what’s wrong unless you look at the bail spring. You should inspect it to ensure that it has been installed correctly.

The most straightforward course of action is to remove the bail spring and inspect it for functionality. After that, you may properly attach the bail spring to test whether the fishing reel bail begins to shut regularly.

Check to check whether the handle works as it should. If everything works now, that means the bail spring was fitted incorrectly.

The Bail Wire Is Bent No. 3

The potential of the bail wire being bent exists. If the bail wire is bent, it will catch and stop working properly.

During revolutions, you may observe that the bail wire catches. When the bail wire bends due to wear and strain, you’ll need to attempt to straighten it up if you want the fishing bail reel to shut.

Thankfully, if you know what you’re doing, this is quite simple to remedy. Simply unscrew the bail screw and begin working on the bail wire.

Allow enough time to bend the wire to the desired form. Using your palms is advised since it will be easier to get the desired outcomes.

You’ll want to align everything so that the screw hole in the bail wire lines up with the hole in the rotor’s side. You should be able to get everything operating again if you can do this.

You Might Purchase a New Fishing Reel

Of course, you may not be interested in doing any of these. You may invest a little money on a new fishing reel if you simply want something that works.

A fishing specialty shop is a good place to start, but you can also buy similar items at many department stores. It can be simpler to acquire new equipment when you simply want to get on with your fishing excursion.

It all depends on how you see the scenario. If your bail spring is broken, you may find it simpler to purchase a new reel.

It’s not out of the question, especially since many fishing reels are affordable. If you have a highly costly and beautiful reel, it can be more cost effective to fix what you currently have.

Last Thoughts

Hopefully, you now have a better understanding of why a fishing reel bail might stop closing. There are just three possible reasons that you should be concerned about.

The bail spring may have broken and is no longer working correctly. If this is the case, you’ll need to replace the bail spring in order to get everything operating again.

It is also possible that the bail spring was placed incorrectly. To test whether the problem is resolved, remove the spring and replace it appropriately.

The bail wire may get bent for a variety of reasons. This causes the wire to catch, preventing the reel from closing properly.

Things should function again when you bend the wire back into the appropriate form. If you don’t want to deal with any of these issues, you may want to invest in a new fishing reel.

For many individuals, fishing is supposed to be a soothing activity. This is why it’s such a disappointment when your equipment fails to perform as expected.

Fortunately, getting things functioning again isn’t difficult. You have the ability to turn things around and return to doing what you like.

Simply remember to look after your fishing gear to keep it safe. It should make things endure as long as possible so you can keep enjoying fishing.

The “replacement bail for spinning reel” is a device that helps to close the bail on your fishing reel. The three most common reasons why the bail doesn’t close are because it’s not connected properly, there’s an obstruction in the line, or it’s broken.

Related Tags

  • bail arm replacement
  • how to adjust the bail on a spinning reel
  • fishing reel repair
  • fishing reel bail parts
  • spinning reel bail loose